WTEYA Concludes a Successful Run at ICIF China 2026 in Shanghai
Release Time:
2026-09-18 14:37
WTEYA Concludes a Successful Run at ICIF China 2026 in Shanghai
The 2026 China International Chemical Industry Fair (ICIF China 2026) drew to a close at the Shanghai New International Expo Centre, and WTEYA's booth (E5D40) stayed busy from the opening bell to the final hour. Over three days we met chemical producers, engineering contractors and project owners from across China and overseas — and put three of our core pieces of equipment on live display.
Three Machines That Drew the Crowd
Rather than posters and brochures, we brought hardware. Visitors could walk up to each unit, inspect the fabrication, ask about materials and discuss their own duty conditions on the spot.
1. Heat Exchanger for a 5 t/h MVR Evaporator
The first unit on the stand was the tube-side heat exchanger built for a 5 t/h mechanical vapour recompression (MVR) evaporator. MVR systems recover the latent heat of evaporated vapour and reuse it as the heating source, which is why the heat exchanger sits at the very heart of the loop: it decides how efficiently that recovered heat actually reaches the liquid. The exchanger on display is fabricated in corrosion-resistant grade material with a fully welded tube-to-tubesheet joint, and visitors spent a good deal of time examining the tube bundle, the welding and the shell-side layout.
2. Mother Liquor Drying Equipment
The second machine was our mother liquor drying unit. In zero liquid discharge and crystallisation projects, the mother liquor left after crystallisation is the hardest stream to handle — high in residual salts, organics and moisture, and awkward to dispose of. The drying unit reduces that stream to a solid or semi-solid residue, cutting the volume that has to leave the plant and making the whole ZLD chain close properly. Several visitors working on chemical and lithium-battery projects asked detailed questions about capacity, energy consumption and material of construction.
3. Membrane Equipment
The third unit was a membrane skid. Membrane separation normally works upstream of evaporation: it concentrates the stream, removes suspended and colloidal matter and protects the thermal stages downstream, which lowers both investment and operating cost for the whole train. The skid on display showed how we integrate pre-treatment, membrane modules and control instrumentation into a compact, container-friendly package.
What Visitors Asked About
Conversations on the stand clustered around a few practical themes: how to cut the energy bill of an existing evaporation train, how to close the loop on high-salinity streams, what material to specify when chloride content is high, and how to scale a pilot result up to full production. Because WTEYA designs evaporation, crystallisation, membrane and drying stages together, we could discuss those questions as one integrated flowsheet rather than as separate pieces of equipment — which is precisely why so many visitors came back for a second or third visit with colleagues.
Thanks to Everyone Who Stopped By
A trade fair is only as good as the conversations in it. Thank you to every engineer, project manager and partner who took the time to talk with our team, challenge our assumptions and share real project data. If we did not get the chance to go deep on your application on the stand, our engineers are still available — send us your water quality analysis or duty conditions and we will come back with a configuration proposal.
Why Teams Choose WTEYA
WTEYA has spent close to two decades on industrial water treatment, with more than 2,000 projects delivered across evaporation, crystallisation, membrane separation and resource recovery. We build the equipment ourselves, run our own fabrication and welding workshops, and support projects from pilot test through commissioning and long-term operation.
Frequently Asked Questions
Q: How to choose the right solution?
A: Consider your industry, capacity requirements, and environmental regulations. Contact WTEYA for expert guidance.
Q: What is the typical project timeline?
A: Project timelines vary based on capacity and complexity. WTEYA provides detailed project schedules during consultation.
Get a Customized Quote in 24 Hours
Don't let wastewater challenges hold back your operations. WTEYA has helped 100+ manufacturers achieve compliance and reduce costs by up to 50%.
Request your free technical assessment and discover how we can optimize your your industry process.
📱 WhatsApp: +86-1800 2840 855
✉ Email: info@vteya.com
🌐 Website: www.vteya.com
Related information
Hazardous Wastewater Evaporation: MVR Design and Compliance
Hazardous Wastewater Evaporation: MVR Design and Compliance Hazardous wastewater is the most demanding feed a thermal system will ever see. It arrives with unknown composition, extreme pH, solvents that flash at low temperature, and heavy metals that must not leave the site in a liquid stream.
LFP Cathode Wastewater: MVR Zero-Discharge Design
LFP cathode production wastewater carries 500-5,000 mg/L total phosphorus, 1,000-10,000 mg/L ammonia nitrogen and 10,000-50,000 mg/L sulfate.
Can an MVR Evaporator Fit in an Existing Building?
Can an MVR Evaporator Fit in an Existing Building? Retrofitting an MVR evaporator into a building that already exists is one of the most common requests we receive, and the answer is not a simple yes or no.
MVR Evaporator for Salt Lake Lithium Extraction
MVR Evaporator for Salt Lake Lithium Extraction Salt lake brine is one of the lowest-cost lithium sources in the world, but it is also one of the most awkward fluids to concentrate.
Cutting Fluid Wastewater: MVR Evaporation and Zero Discharge
⚙️ Why Spent Emulsion Resists Conventional Treatment Every machining line that uses water-miscible coolant eventually produces a waste stream that cannot be sewered, cannot be burned as-is, and cannot be treated biologically without a fight.
MVR Evaporator Condensate Reuse: Quality and Options
MVR Evaporator Condensate Reuse: Quality and Options The condensate produced by an MVR evaporator is not a waste stream to be disposed of — it is distilled water of consistent quality.
Guangdong WTEYA Environmental Technology Co., Ltd
Contact us
WhatsApp: +86 1800 2840 855
Tel: +86-0769-28636053
+86-0769-28636126
Email: info@wteya.com
Add: Floor 14, F4 building, TianAn digital town,
Nancheng District, Dongguan,Guangdong, China